Turbine Flow Meter has always been used for measurement accuracy wherever the processes involve clean materials without much viscosity. It uses a simple technology that is easily understandable for any technician and therefore less complex while operating. It contains a rotor that is freely suspended and will rotate according to the velocity of the liquid flow. It also means that when the flow is fast, the rotor will generate more pulses on the transmitter, giving a reading on the flow rate. It can detect gas or liquid flow rate more accurately than other flow meters. However, you cannot use the turbine flow meter in all places as it sees only middle to low flow rate and where the liquid is non-corrosive or low-corrosive and clean.
The t
urbine flow meter needs to be maintained regularly, or otherwise, it will not work perfectly. There are separate turbine gas flow meters and liquid turbine flow meters. If you need technical details and other specific information for your requirements, you may click here at www.silverinstruments.com to get your queries answered.
Selecting a Good Turbine Flow Meter
Few manufacturers supply high-quality turbine flow meters for customers worldwide. These flow meters are sensors that determine the volumetric flow of clear liquids and are used in various outputs. You will find the Flow Meter in industries where batch dispensing operation is carried out. It is used mainly in fuel, gasoline, diesel, water, milk, natural gas, RO water, compressed air, biogas, etc.
Instrumentation is a general term used for devices that range from the simple thermometer to complex multi-sensor industrial control systems. In all the above cases, the turbine flow meters are installed and not any other flow meters. The turbine types are made out of stainless steel and have high accuracy, and they cost relatively lower than different types of flow meters.
It is generally seen that a Paperless Recorder which is a data logger, can record measurement data for process monitoring applications. It helps in providing data to several departments, so the company’s management takes that early and focused decision. These loggers do not use paper, ink, or special paper, reducing the cost.
Measuring Flow with Meters
Flow measurement can be done with the help of a variety of flow meters. The most common among them is the Obstruction or differential pressure type, Inferential or turbine flow type, Electromagnetic, Anemometer, Ultrasonic, Positive-displacement, Fluid dynamic, Mass flow meter, etc.
However, wrong decisions or choosing faulty flow meters can be risky if the same is to be used in a chemical process. On the other hand, a gas flow meter of the best quality has to be used to determine the correct volume of fuel gases like natural gas and liquefied petroleum gas. It is noteworthy that a gas meter measures only a defined volume. Therefore, it is most suitable for any pressurized quantity or quality of the gas flowing through the meter.
Hence, the quality of the meter is important, and the flow rate measurement must be done accurately to ensure that the fluid control processes are safe, smooth, and cost-effective.