Thu. May 23rd, 2024
airpods to a PC

Apple’s AirPods are Bluetooth earbuds that are entirely cordless and developed specifically for iOS devices like the iPhone and iPad. However, AirPods are compatible with a wide range of other devices, including a Windows laptop.

This article will show you how to pair and connect your AirPods to your computer.

Put your AirPods in the case and press and hold the little button on the rear until the status light on the back starts blinking white. Your AirPods should appear in the “Add a device” window in your laptop’s Bluetooth settings, where you may pair and connect them with a click.

Here’s a whole step-by-step guide with photos.

Make sure your AirPods are fully charged before putting them in their case. Looking on a budget but good laptop you can have a look on this list of best laptops under 800 dollars.

From the Start menu, go to Settings on your computer. Above the power button, there’s a gear-shaped icon. You may also use the Start menu search box to look for “Settings.”

1st airpod

From the Start menu, select Settings. Business Insider/Dave Johnson

Select “Devices” from the drop-down menu.

Make sure Bluetooth is turned on at the top of the “Bluetooth & other devices” section. The switch should be coloured blue and slid to the right.

Select “Add Bluetooth or other device” from the drop-down menu.

2 airpods

In Settings, make sure Bluetooth is turned on, then click the Add Bluetooth option. Business Insider/Dave Johnson

Click “Bluetooth” in the Add a device window.

Remove the AirPods case’s lid.

For several seconds, press and hold the little button on the rear of the case until the status light on the front of the case begins to flicker white.

button on the airpods case

The AirPods are put into pairing mode by pressing the button on the rear of the case. Business Insider/Dave Johnson

On your PC, the AirPods should appear in the list of devices that can be paired. After a few moments, they may appear as “Headphones,” then change to “AirPods.”

Select “AirPods” from the drop-down menu.

4 airpods

You should see the AirPods appear in the list of available devices once they’ve been in pairing mode for a while. Business Insider/Dave Johnson

The AirPods will connect to Windows and a success message will appear. After that, click “Done.” You may now use AirPods to listen to audio from your computer.

What if you don’t have access to a Mac? Generally speaking, the procedure should be the same. To a large extent. The only thing that will actually change is the way you access the Bluetooth page. Here are a few options for getting there:

Open Settings from the Start menu on a PC.

Select devices, then go to Bluetooth and other devices and press the + sign next to “Add Bluetooth or other device.”

Once your AirPods appear on the screen, open the case lid, hold the button, and pick your AirPods.

After the headphones have connected, click “Done.”

Not all PCs, especially desktops, come with Bluetooth. If you have a laptop, though, your computer is likely to have Bluetooth capabilities satta.

That’s all there is to it, guys. Enjoy your strange new world, in which your AirPods and PC work in unison.

By