Thu. Jun 13th, 2024

If you are finding the answer, what is the quick and affordable method to guarantee your engine gets clean air, which enhances performance and fuel economy? The best answer is to replace your car’s air filter. The air filter housing is usually a black plastic box toward the engine compartment’s top. Start by finding it. If you’re having problems finding it, go to your car’s manual. Once found, remove the bolts holding the housing in place by unscrewing or unclipping it. 

The Significance of DIY 

With the dusty and dirty air in Myanmar, it is important that you change the air filter yourself. The majority of Myanmar’s roads are rough and dusty, which exposes cars to a lot of airborne particles that quickly clog air filters. Frequent replacement maximizes fuel efficiency. It also proves to guard against engine damage by ensuring adequate airflow to the engine. Do-it-yourself air filter replacements are less expensive than hiring a pro and allow for prompt maintenance, which is especially important in Myanmar’s remote regions where access to repair facilities may be restricted. Used cars for sale in Myanmar owners may reduce the likelihood of expensive repairs, preserve engine performance, and extend engine life by managing this straightforward but essential duty.

Here is the process for replacing your car’s air filter:

Materials Needed


• New air filter


• Screwdriver or socket set 

• Shop rag 

Steps by Step Process

Locate the Air Filter Housing

Your car’s air filter housing is easily found by opening the hood. Most of this box is made of black plastic. Usually, it’s situated next to the engine’s side or front. It is located at the top of the engine compartment’s top.

Open the Air Filter Housing

Depending on the type of your vehicle, the housing may be secured with metal clips, screws, or the other option is bolts. If clips are used, simply unclip them by hand. Use a screwdriver or socket set to remove them in case the screws or bolts are present, 

Remove the Old Air Filter

Carefully remove the previous air filter when the housing has been opened. To guarantee that the new filter is placed correctly, observe how the old filter is arranged inside the housing.

Inspect the Air Filter Housing

Before installing the new filter, inspect the housing for any dirt or debris. Use a shop rag to wipe it clean if necessary.

Install the New Air Filter

Insert the new air filter into the housing, ensuring it fits properly.  Make sure it is oriented in the same direction as the old filter.

Close the Air Filter Housing

After replacing the housing cover, fasten it firmly with the nuts, screws, or clips you previously took out. To stop any unfiltered air from getting into the engine, make sure it is securely fastened.

Check Your Work

Ensure the housing is properly sealed. Check to make sure that there are no gaps. Give the filter a final check to confirm it’s securely in place.

Dispose of the Old Filter

The old air filter should be disposed of properly because it can include pollution and grime that could be bad for the environment.


Here are some useful tips from SAT Japan to improve the efficiency of air filter and your vehicle:

  • See the Manual for Your Vehicle: 
  • The kind and position of the air filter are described in full in the handbook that came with your car. 
  • Check Frequently: If you drive in dusty or rough circumstances, after every twelve thousand to fifteen thousand miles, the best thing to do is to check your air filter. 
  • Improve performance: Just by following these simple and easy tips, you can clearly see the difference in the performance of your car; the long-run efficiency also increases. 

By Syler