These days, fixing dents on cars is not a big deal because you can choose from a variety of tools and techniques. For example, if you buy a dental repair kit, it will give you all the tools to remove dents from your car. Some of these tools include rods, sticks, dollys, hammers, and glue sticks, just to name a few. In this article, we are going to share with you some tips for using tooth pullers that will make using these kits easier. Read on for more details.

While this may sound hard to believe, you can use suction to pull out the dents in your car. However, it is important to remember that this technique is only suitable for large dentures. In other words, since you need a clean surface to attach the suction cups, you cannot use this technique to pull out small dents.

Steps used to pull the dent

Here are five simple steps that will help you use a suction cup and dent puller out of your car. Make sure you follow all of these steps as every single step is very important or can cause further damage to your vehicle.

1. Clean the target surface area.

2. For the appropriate attachment, click the tabs

3. You need to pull gently to increase traction

4. After the dent pops out, you can disassemble the cup

Glue and scissors

Since the technique is relatively new, you may not be familiar with it. This kit comes with small plastic tabs that allow you to easily pull the denture in your car. Since these tabs have a rough baking feature, they can increase the surface area when you press the glue.

Thus, they act as an anchor in the dent, allowing you to pull the dent out. Here are some simple steps you can take to apply this method and fix the dent.

1. Start by cleaning the surface area

2. Plug in the glue gun to heat it up

3. Apply a little glue to the panel

4. Now press the plastic tab

5. Wait a while for them to cool

6. Attach a sliding hammer to pull

7. Gently tap or pull the indent back to smooth it

8. Use an alcohol-based cleaner to spray glue

9. Use a plastic spoon to remove the glue

Casting in place

Spot welding is an ideal depth method and can be used for dents where paint is damaged. All these methods are colorless. In other words, you don’t need to refinish the paint once the dent has healed.

However, if you use spot welding, you will have to repaint it. But the point is, that this technique shouldn’t be used unless you have experience in the field. Therefore, we do not recommend trying this technique at home. Only qualified persons are allowed to perform spot welding.

Long story short, use these tips to repair dents on your car without expert help. However, if you feel you can’t do it yourself, you should contact a professional to stay safe.